Power Skynode

Power up Skynode

  1. Power Skynode by connecting the AC/DC Power supply to a wall socket. The green, blue and orange LEDs on Skynode will turn on for 2 seconds, followed by a blinking pattern of the green LED. The power module shows a steady green LED while powered on. ​​​

  2. The green LED on Skynode will blink while AuterionOS is booting and turn solid once the system is up and running. The blue LED turns on as soon as the MAVLink stream is available. The red LED blinks if the Data Link module is not connected. LED meanings are summarized here.

PreviousGet Skynode readyNextRegister Skynode

Last updated